What’s LWRT Mold?

As a leading LWRT Mold maker, we’re pleased to introduce new technology named LWRT for somebody else.

LWRT means Low weight reinforced thermoplastics. This type of material has been widely used in underbody shield of Automotive industry. both for Interior and exterior parts.

LWRT composite sheets are typically thermoformed into parts with a desired geometry.
Thermoforming is a stretch-forming process resulting in a reduction of the sheet’s original thickness. The deeper the cavity of the geometry is designed, the thinner the wall thickness of the final part will be.
The formability of the sheet material is its ability to form into parts with desired geometry without failure. The geometry of the parts varies according to different applications, and some
applications have a very complex geometric design. A good example of such applications is trunk trim, which has a deep-drawn, multi-cavity geometry.

The advantage of LWRT material would be:

1.weight reduction of at least 25% compared to traditional technologies

2.acoustic performance satisfaction without need for additional sound-absorbing elements to be welded or over-molded per piece.

MDC Mould, as a professional LWRT Mold maker, has produced many molds for our customers, such as Audi, BMW, Daimler, Jaguar, etc.

Please keep us in touch as below info, if you required.

Taizhou Huangyan MDC Mould&Plastic Co.,ltd

No.35-1 Qingfeng Rd, Huangyan North Industrial estate, Taizhou, Zhejiang, china 318020

E-mail:[email protected];


MDC mould, as a professional LWRT moldmaker in china, has experienced with Daimler, Audi, Jaguar, etc, well-known car manufactuers on LWRT molding technology, as well as their OEM.

LWRT mold is mostly used in Automotive Interior and underbody shields with GMT or GMTex due to its high-strength composites material. In the meanwhile, LWRT has some functions for noise absorption, protection against dirty and stone impact, acoutic performance. That’s the reason why it’s extended to underbody in Automotive industry.

In regards to molding technology, LWRT  mold requires lower pressure thermoforming, the holes can be molded directly, as well as edge cutting.

The advantages of LWRT will be as follows:

*Weight reduction a lot

*Corrosion resistance

*Fallsafe behaviour due to high resistance to crack

MDC mould is able to make LWRT Mold, as well as GMT&GMTex mixed.

For any doubts, please try to contact with us below:

Taizhou HuangYan MDC Mould & Plastic Co.,LTD
Add:No 35-1 QingFeng Road, North Industrial Estate,Huangyan, Zhejiang,China.(Zip code:318020)
Tel: +86 576 84616076 â•‘Fax:+86 576 84616079
[email protected]â•� www.zjmdc.com